7Pressure range [bar] Body MaterialSeal MaterialConnectionsG[inches]V AC?0.2?0.5?1?2?3?5?8?10?16?18?25?30?100Orifice [mm] BrassSt. St.PlasticNBREPDMFKMPTFE0.40.60.81.21.62.02.42.53.04.05.06.08.0101213202532405065Function 2/2Direct-acting Plunger6011General Purpose....M5, 1/8, MAN6013General Purpose.....1/8 - 3/8, MAN6027Compact.....1/4 - 1/20255Steam to 150 #, High Pressure......1/4 - 1/2Function 2/2Direct-acting Pivoted Armature0330/1Slightly Contaminated Fluids......1/4 (MAN)Function 3/2Direct-acting Plunger6012General Purpose.....M5, 1/8, MAN6014General Purpose.....1/8 - 3/8, MANFunction 3/20330/1Slightly Contaminated Fluids......1/4 (MAN)0124/5Aggressive Chemicals....1/4 (MAN)Function 2/2Servo-assisted Plunger6281 EVGeneral Purpose.....1/2 - 25404Compressed Gases....1/2 - 10406Steam to 150 #..1/2 - 1Function 2/2Servo-assisted Isolated Pilot5282Slightly Contaminated Fluids.....1/2 - 2 1/20142AggressiveChemicals...1/2 - 2 (union)Function 2/2Servo-assisted Soft Coupled6213 EVClean Water.....1/2 - 2 Function 2/2Servo-assisted Hard Coupled0290Zero DP, Clean Fluids.....1/2 - 20407Steam to 150 #..1/2 - 2Function 3/2Servo-assisted Isolated Pilot0340Slightly Contaminated Fluids..1/4 - 1 1/2Selection Guide Solenoid ValvesThis chart can be used to choose a valve where the working pressure (orange bar) is known. For each valve the available orifices are detailed (green bar). At the right side of the chart the available body and seal materials can be seen as well as the possible process connections. Plunger type direct-acting valves should be restricted to neutral and clean fluids while pivoted armature valves offer excellent reliability by employing a media separating diaphragm to control corrosive, contami-nated or aggressive fluids. The use of servo-assisted valves is governed in large part by the pilot con-struction and employ diaphragms for liquids and gases and piston seals for higher pressures and steam.. Standard . Optional MAN Manifold mount

8Direct-acting miniature solenoid valve which is plunger operated for neutral gases, liquids and technical vacuum. Available in standalone or manifold mount versions, there is also an "analysis" version which is manufactured under cleanroom conditions.Technical DataPressure range0-12 bar, max.Temperature media-10 ºC - +100 ºC Ambient temperature+55 ºC, max.Body materialBrass or Stainless steelSeal materialFKMCoil materialEpoxyPower consumptionDC: 4 W, AC: 9 VA (inrush), 6 VA (hold)Protection classIP65Electrical Connection2507 cable plug Form B 2/2-Way, G 1/8, 0-12 bar. Brass or Stainless steel. FKM seal as standard. Slip over coil can be rotated in 4 x 90 degreesPlunger Operated 2/2 Way Solenoid Valve6011Options. Cable plug with LED and/or varistor Envelope Dimensions [mm] (see datasheet for details)Ordering ChartPort connectionOrificeKv ValuePressure range [bar]Item no. Voltage/Frequency [V/Hz][inch][mm]DCAC24V DC24V AC230V ACBrassG 1/81.60.060-60-12163 499163 500163 502G 1/82.00.110-4.50-8163 503163 504163 506G 1/82.40.130-30-6161 193163 507161 194Stainless steelG 1/81.60.060-60-12163 509163 510163 512G 1/82.00.110-4.50-8163 513163 514163 516G 1/82.40.130-30-6163 517163 518163 520SizeABCG 1/8251552.48 2507 cable plug Form B included (see page 32)Shown without plug