8Prices shown do The more you prepare, the less you repair!not include VATWatco Mixing TrayMulti-purpose, durable mixing tray for Watco Concrex or cement mortar. Prevents unsightly ground stains. 950mm x 950mm x 50mm deepWatco Concrex® Application KitsLarge Application Kit Includes: 4 plastic bags for transporting,750ml white spirit, 10" steel fl oat, mix + apply trowel,wire brush/scraper, 5 cloths and nitrile gloves.Ideal for 25kg of Concrex.Small Application Kit Includes: 2 plastic bagsfor transporting, 250ml white spirit,mix + apply trowel, wire brush/scraper, cloth and disposable gloves.Ideal for 10kg of Concrex.Watco Tack Coat Damp PrimeEnables damp surfaces to be repaired or screeded with Watco ConcrexEpoxy repair materials such as Watco Concrex should ideally be applied to a dry surface. Where this is not possible, first apply Watco Tack Coat Damp Prime. This primer eliminates the problems associated with repairs to areas which cannot be dried out.Suitable for: Concrete, stone, sand and cement, metalUsage: Ideal for damp areas inside and outCoverage: Available in 1m2 or 6m2 packsPreparation: Can be applied over existing paint, but all poorly bonded paint must be removed and well bonded paint roughened to provide a keyCuring time: Can be overcoated with Concrex (p7) within 30-60 minutes 1m2 pack 6m2 packTack Coat: £15.80 £52.50Tack Coat Cold Cure: £16.00 £55.30Tack Coat Damp Prime: £19.20 £57.40Watco Tack Coat Cold CureHelps with repairs in cold areasMain uses: An epoxy adhesive primer, for use before screeding with Watco Concrex Cold Set between 0-10°CSuitable for: Concrete, stone, sand and cement, metalUsage: Suitable for internal or external useCoverage: Available in 1m2 or 6m2 packsPreparation: Can be applied over existing paint, but all poorly bonded paint must be removed and well bonded paint roughened to provide a keyCuring time: Can be overcoated with Concrex Cold Set (p11) in approx.1 hour at 0°C or 45 minutes at 5°CWatco Tack CoatAchieve stronger repairs with this epoxy resin adhesive primerSuitable for: Concrete, render, stone, sand and cement, metalUsage: Interior & exteriorCoverage: Available in 1m2 or 6m2 packsPreparation: Can be applied over existing paint, but all poorly bonded paint must be removed and well bonded paint roughened to provide a keyCuring time: Can be overcoated with Watco Concrex within 30-60 minutesLarge Application Kit: £21.00Small Application Kit: £12.10Mixing Tray: £25.20Cures at 0°C - 10°CEverything you need for a great result!1mPrices

9For advice or to place an order Tel: 01483 418 418T: 01483 418 418E: sales@watco.co.ukF: 01483 428 888www.watco.co.ukWatco Concrex®High Temperature GradeA version of Watco Concrex which will toleratehigh temperatures including steam cleaningWatco Concrex High Temperature Grade is specially formulated to resist temperatures of up to 100°C, much higher than conventional epoxy resin mortars. It is ideal for repairing damage caused by hot trolley wheels and equipment moved from ovens.Suitable for: Concrete, sand and cement, metalCoverage: 1.2m2 per 10kg at 5mm thickDepth: From feather-edge to 50mm depth (full strength is achieved at 5mm)Curing time: 3-6 hours at 15-20°CPrimer: Tack Coat (p8) recommended but not always requiredTools: Steel float or trowelBuy BULK and SAVE: 1 pack 2 packs 3+ packsConcrex High Temperature Grade 10kg: £91.40 £86.80 £82.20Mixing Tray: £25.20Steel float: £5.80Trowel: £2.60Ideal for repairs near ovens and furnacesResists temperatures up to 100°CRepair MaterialsConcrete-15%-10%-Watco Concrex® Rapid SetExtra fast curing epoxy repair mortar for heavy industrial useUse Watco Concrex Rapid Set for busy areas where minimal downtime is essential. It is as simple to use and has all the advantages of the original Watco Concrex (p7).Main uses: Ideal for rapid repairs in all heavily trafficked areasUsage: Interior & exteriorSuitable for: Concrete, sand and cement, metalCoverage: 1.2m2 per 10kg at 5mm thickDepth: From feather-edge to 50mm depth (full strength is achieved at 5mm)Curing time: Ready for heavy traffic in 3 hours at 15-20°CPrimer: Tack Coat (p8) Tools: Steel float or trowel 1-2 packs 3-4 packs 5+ packsConcrex Rapid Set 10kg: £90.60 £86.10 £81.50Concrex Rapid Set 25kg: £173.30 £164.60 £155.90Tack Coat 1m2 pack: £15.80BeforeAfter-10%Buy BULK and SAVE:-5% Ready for heavy traffic in 3 hoursBuyBULKandSAVEPrices