75For advice or to place an order Tel: 01483 418 418T: 01483 418 418E: sales@watco.co.ukF: 01483 428 888www.watco.co.uk Each Box of 6 cansEasymark single colour 728ml can £18.80 £100.80Easyline Applicator (4 wheel) £138.40Easyline Applicator (2 wheel) £101.60Watco Easymark Aerosol Line Marking SystemEasy to use aerosols with a light weight application system. Economical alternative for existing applicators. Resistant to most chemicalsWatco Easymark aerosols fi t most commonly used applicators, but are not compatible with Watco Sprayline Plus or Easyline Airfl ow applicators (please call for more details).Main uses: Defi ning key areas on factory fl oors, car parking spaces etc.Traffi c: Light to medium traffi cSuitable for: Concrete, sand and cement, asphaltCoverage: Approx 100 metres of 50mm wide line per 728ml aerosolCoats: One coat is usually suffi cientCuring time: Touch dry in 10-15 minutes, fully cured in 24 hoursWatco Easymark ApplicatorsUse the Easymark 2 or 4 wheel applicator for clean and accurate lines with Easymark Aerosols. Both units are adjustable to spray in 38, 50 or 75mm wide lines. Can also be used with other commonly used brands of aerosol line marking paints.Watco Sprayline PlusIndustrial grade aerosol paint systemWatco Sprayline Plus is an easily applied industrial grade aerosol paint designed to produce lines quickly when used with a Watco Sprayline Plus Applicator.. Fast, accurate application. Highly visible, durable and weather resistantMain uses: Defi ning key areas on factory fl oors, car parking spaces etc.Traffi c: Light to medium traffi cSuitable for: Concrete, sand and cement, asphaltCoverage: Approx. 80 metres of 50mm wide line per 591ml aerosolCoats: One coat on smooth surfaces, two coats on textured surfacesCuring time: Touch dry after a few minutes and fully hardens in 12-24 hoursWatco Sprayline Plus ApplicatorsEasy folding 4-wheel applicator helps with storage and transportSturdy, reliable applicator to apply lines quickly and accurately. 4-wheel applicator is adjustable from 30mm to 50mm wide line. 1-wheel applicator for curved lines No. of units 1-3 4-11 12-35 36+Sprayline Plus 591ml can £18.80 £17.40 £15.40 £13.10Sprayline Plus Applicator (4 wheel) £122.20Sprayline Plus Applicator (1 wheel) £26.30Sprayline Plus1 wheel applicatorBlueRedYellowYellowWhiteBlackBlueRedYellowWhiteFloor MarkingSpray Paints & Tapes

76Prices shown do Paints to warn, paints to advise!not include VATWatco StepmarkerA hard wearing, slip resistant coating for lines and step edgesMost paints are worn out very quickly by the regular foot traffic on step edges. This coating can be applied in a single, quick drying layer and is based on a 2-part epoxy for maximum abrasion resistance. If using internally ensure area is well ventilated.. Clearly highlights step edges and trip hazards. Slip resistant and chemical resistant. Can be used as low as 5°C. Ready for foot traffi c in 4 hours. Pre-blended aggregate for easy applicationMain uses: Step edges and loading bays. Can also be used as a tough line markerUsage: Interior & exteriorSuitable for: Concrete, brick, asphalt, stone, wood and metalsTraffic: Heavy trafficCoverage: 1 litre will produce a 50mm wide line on approx 50m of step edgesSlip resistance: Low slip potential - wet PTV of 56Coats: One thick coat applied by brush is usually sufficientCuring time: Ready for foot traffic in 4 hours at 15°CColour shown hereis for indication only.Actual colour is fluorescent.Samples are available. 1-3 packs 4+ packsStepmarker 1 litre: £38.90 £32.802" Paint Brush: £4.20FluorescentYellowYellowWhiteHigh Visibility Paint 2.5 litres: £50.40Masking Tape: £2.60Brush (5"): £6.30Brush (2"): £4.20Watco High Visibility PaintA fluorescent solvent-free paint for horizontal or vertical surfacesWatco High Visibility Paint is easy to apply by brush or roller, which can be cleaned easily with water.. Excellent resistance to UV and weathering. Flexible, waterproof membrane. Can be applied to damp surfacesMain uses: Highlight hazards such as low beams, trip hazards or snag pointsUsage: Interior & exteriorSuitable for: Concrete, brick, masonry and asphalt (not metal)Traffi c: Light to medium traffi cCoverage: Approx. 10-15m2 per 2.5 litres per coat depending upon texture of substrateCoats: One coat is usually suffi cientCuring time: 12 hours at 15°C