48Prices shown do Maximum traction for dangerous floors!not include VATHEAVY USE COATINGSWatco UltragripExtremely coarse skid resistant coating Watco Ultragrip is a thick, hard wearing epoxy resin anti slip coating, which has an exceptionally coarse surface texture with peaks typically 5mm high. Watco Ultragrip is easily spread with a trowel and over-rollered before curing to leave a very coarse anti slip surface.Avoid using the cold cure version at temperatures above 20°C. . Positive slip and skid resistance in areas of severe hazard even when wet, frozen or oily. Extra grip for forklift trucks, cars, pedestrians, wheelchairs etc.. Solvent-free, low odour formula suitable for confined spaces. Superior resistance to chemical attack and harsh mechanical scrubbing. No primer necessary for most applicationsUsage: Interior & exterior Suitable for: Concrete, sand and cement, metal or woodSlip resistance: Low slip potential - Wet PTV 69Coverage: Approx. 3.5m2 per 8kg packCoats: One coat usually requiredCuring time: Watco Ultragrip: 24 hours at 20°C. Watco Ultragrip Cold Cure: 24 hours at 5°CWatco Ultragrip 8kg: £99.80Watco Ultragrip Cold Cure 8kg: £99.8010" Steel Float: £5.80Roller/Frame & Handle: £29.40Replacement Roller: £6.80Watco Safety Grip® RapidHeavy duty anti slip coating that cures in only 8 hoursWatco Safety Grip Rapid uses a new formula which allows coated areas to be brought back into use more quickly. Like standard Safety Grip, it is applied in a single thick coat - simply roller out, scatter the aggregate and roller again to bed it in. Curing time: Ready for light traffic in 8 hoursHeavy traffic in 18 hours at 15-20°C 1-4 packs 5-8 packs 9+ packsSafety Grip Rapid 5m² pack £104.50 £99.20 £94.00Buy BULK and SAVE:-5%-10%PricesBlackSafety GreenSafety GreenLight GreyTile RedSafety BlueSafety YellowMid GreySafety RedLight GreyTile RedMid BlueSafety YellowMid Grey

49For advice or to place an order Tel: 01483 418 418T: 01483 418 418E: sales@watco.co.ukF: 01483 428 888www.watco.co.ukWatco Safety Grip®Heavy duty, anti slip flooring system for dangerous areas. Provides extra traction in areas of severe slip hazard, even when wet or oily. Coarse anti slip finish. Withstands constant foot and wheeled traffic. Chemical resistant. Solvent-freeMain uses: Stairs, floors surrounding machinery, ramps etc. inside or out. Also ideal for maritime useUsage: Interior & exterior Suitable for: Concrete, sand and cement, wood or metal Slip resistance: Extremely low slip potential - Wet PTV 92Coverage: Approx. 5m2 per packCoats: One coat usually required.Curing time: Accepts light traffic in 20 hours at 15-20°CWatco Safety Grip® Cold CureOffers the benefits of Watco Safety Grip and will cure at zero Celsius (0ºC)Use in unheated areas, outside during the winter months or whenever the temperature drops below 10ºC. For easy cold weather repairs to floors before using Watco Safety Grip Cold Cure try Watco Concrex Cold Set (p10).Curing time: Ready for light traffic in 24 hours at 10°CRampsStepsAnti Slip Floor CoatingsCoarse Particle*A coat of Watco Epoxy Gloss Coat safety yellow (p27) or Watco Epoxyline yellow (p84) is recommended on darker substrates or bare concrete prior to applying Watco Safety Grip safety yellow** White and Natural colours are not available for Watco Safety Grip Cold CureBlackStoneSafety GreenNatural**Light GreyTile RedSafety BlueSafety Yellow*White**BuffMid GreyTerracottaSafety Red 1-4 packs 5-8 packs 9+ packsSafety Grip 5m2 pack £98.20 £93.30 £88.40Safety Grip Cold Cure 5m2 pack £104.50 £99.20 £94.00Roller/Frame & Handle: £29.40Replacement Roller: £6.80-10%Buy BULK and SAVE:-5%PricesHelps you meet DDA requirements