Watco SafetyCoat® Range47For advice or to place an order Tel: 01483 418 418T: 01483 418 418E: sales@watco.co.ukF: 01483 428 888www.watco.co.ukAnti Slip Floor CoatingsFine ParticleWatco Safety CoatUnique anti slip coating for heavily trafficked floorsWatco Safety Coat is a unique formulation that gives you a first class finish. A special aggregate is held in suspension in the liquid. The coating dries to an evenly textured, slip resistant surface - more reliable, attractive and easier to clean than conventional 'gritty' paint.. Contains fine, slip resistant particles embedded in a tough epoxy resin coating. Extremely durable and chemical-resistant. Non-flammable, solvent-free and virtually odourless formula. Gives a professional looking finishWatco Safety CoatAnti Bacterial Combines the safety of an anti slip surface with active anti bacterial protectionThe new silver ion technology in Safety Coat Anti Bacterial has a long lasting bactericidal effect. The active ingredient is held throughout the coating, not just the surface, so it cannot be removed by wear or by cleaning.. Ideal for food industries, hospitals, locker rooms and food storage areas. Attacks micro-organisms including MRSA. Solvent-free and virtually odourless. Killed over 99.9% of E Coli and MRSA bacteria over 24 hours in lab testsMain uses: All potentially slippery, concrete floors in heavy wear areasUsage: Interior Suitable for: Concrete, sand and cement or woodSlip resistance: Low slip potential - Wet PTV 65. We recommend Watco Safety Grip (p49) for use on ramps or in very wet areasCoverage: Approx. 30m2 per 5 litres per coatCoats: Two coats usually requiredCuring time: 12 hours at 15-20°CTools: RollerBlackBuffTerracottaMid GreyTile RedSafety YellowWhiteMid BlueLight GreyMid GreenWithstandsforklift trucksANTIBACTERIAL 1-4 packs 5-8 packs 9+ packsSafety Coat 5 litres: £133.90 £127.30 £120.50Safety Coat Anti-Bacterial Grade 5 litres: £142.80 £135.70 £128.50Roller/Frame & Handle: £29.40Replacement Roller: £6.80-10%Buy BULK and SAVE:-5%-Prices

48Prices shown do Maximum traction for dangerous floors!not include VATHEAVY USE COATINGSWatco UltragripExtremely coarse skid resistant coating Watco Ultragrip is a thick, hard wearing epoxy resin anti slip coating, which has an exceptionally coarse surface texture with peaks typically 5mm high. Watco Ultragrip is easily spread with a trowel and over-rollered before curing to leave a very coarse anti slip surface.Avoid using the cold cure version at temperatures above 20°C. . Positive slip and skid resistance in areas of severe hazard even when wet, frozen or oily. Extra grip for forklift trucks, cars, pedestrians, wheelchairs etc.. Solvent-free, low odour formula suitable for confined spaces. Superior resistance to chemical attack and harsh mechanical scrubbing. No primer necessary for most applicationsUsage: Interior & exterior Suitable for: Concrete, sand and cement, metal or woodSlip resistance: Low slip potential - Wet PTV 69Coverage: Approx. 3.5m2 per 8kg packCoats: One coat usually requiredCuring time: Watco Ultragrip: 24 hours at 20°C. Watco Ultragrip Cold Cure: 24 hours at 5°CWatco Ultragrip 8kg: £99.80Watco Ultragrip Cold Cure 8kg: £99.8010" Steel Float: £5.80Roller/Frame & Handle: £29.40Replacement Roller: £6.80Watco Safety Grip® RapidHeavy duty anti slip coating that cures in only 8 hoursWatco Safety Grip Rapid uses a new formula which allows coated areas to be brought back into use more quickly. Like standard Safety Grip, it is applied in a single thick coat - simply roller out, scatter the aggregate and roller again to bed it in. Curing time: Ready for light traffic in 8 hoursHeavy traffic in 18 hours at 15-20°C 1-4 packs 5-8 packs 9+ packsSafety Grip Rapid 5m² pack £104.50 £99.20 £94.00Buy BULK and SAVE:-5%-10%PricesBlackSafety GreenSafety GreenLight GreyTile RedSafety BlueSafety YellowMid GreySafety RedLight GreyTile RedMid BlueSafety YellowMid Grey