44Prices shown do The more you prepare, the less you repair!not include VATWatco CemtetchTAcid-based etchant to prepare concrete before painting Watco Cemtetch is excellent at removing general dirt from bare concrete. Removes laitance (a weak dusty layer) on new concrete and will provide a key for surface coatings on very smooth concrete. Watco Cemtetch can also be used to etch bare concrete to improve slip resistance.. Essential preparation for new, smooth or bare concrete. Ensures excellent bonding of coatings . Reduces alkalinity of new concrete (important when applying single pack paints)Main uses: Surface preparation for concreteUsage: Interior & exteriorSuitable for: Concrete and brickworkCoverage: Approx. 20m2 per 5 litresTools: Stiff broom Buy BULK and SAVE: 1-2 packs 3-4 packs 5+ packsCemtetch 5 litres: £22.10 £20.90 £19.80Stiff Broom: £8.70Absorbent Granules 3 packs, absorbs 3 x 30 litres: £26.70Watco Powerfloat PrimerImproves the adhesion of paint to difficult substratesWatco Powerfloat Primer enables coatings to be applied to hard, smooth surfaces which would usually reject paint. Avoid using any coating which includes a strong solvent. For more information, please ask for a product datasheet.. Easily applied by roller. Can be used on ceramic tiles before applying a slip resistant coating. New Powerfloat Primer Rapid can be overcoated in 3 hoursUsage: Interior Suitable for: Powerfloated or glazed concrete, ceramic tiles, stainless steel and aluminiumCoverage: Approx. 30m2 per 5 litresCoats: One coat usually requiredCuring time: Powerfloat Primer: 16 hours at 15-20°C Powerfloat Primer Rapid: 3 hours at 15-20°CPowerfloat Primer 5 litres: £62.80Powerfloat Primer Rapid 5 litres: £72.50Roller/Frame & Handle: £29.40Replacement Roller: £6.80Watco 4-Hour Epoxy PrimerPrime and overcoat porous surfaces in one dayA two-pack solvent-free primer designed to reduce suction on porous, very absorbent, surfaces. It has significant benefits over traditional water-based primers in respect of penetration, substrate binding and curing. It improves the appearance and performance of single coat, high build epoxy resin floor coatings.. Solvent-free (not water-based). Cuts labour costs and waiting timeMain uses: Binds weak and crumbly surfacesUsage: Interior Suitable for: Concrete, sand and cement Do not use on non-porous surfacesCoverage: 15-20m2 per 5L, depending on porosityCoats: One coat is usually sufficientCuring time: 2-4 hours at 10-15°C4-Hour Epoxy Primer 5 litres: £71.40Roller/Frame & Handle: £29.40Replacement Roller: £6.80-10%-5%New fast curing version

heavy usesee alsointernal useexternal useWe've lots of anti slip coatings.I can help you choose the right one.your anti slip FLOOR solution!. Cold Set ...........................................p46. Fast Curing ......................................p46. Anti Bacterial ..................................p47. For Tiles ............................................p53. Internal ............................................p50. Extremely Coarse ............................p51. Fast Curing ......................................p52. Flexible ............................................p52. Ramps .............................................p49. Non-abrasive ...................................p49. Cold Set ...........................................p49. Asphalt application ........................p51. Chemical Resistant .........................p50. Car Ramps ......................................p51. Polyurethane ...................................p53. Walkways ........................................p54Loz45For advice or to place an order Tel: 01483 418 418T: 01483 418 418E: sales@watco.co.ukF: 01483 428 888www.watco.co.uk