42Prices shown do The more you prepare, the less you repair!not include VATWatco Bio-DBiodegradable degreaser for the preparation of floors before coatingWatco Bio-D is ideal for confined or odour sensitive areas. It may be diluted with water for removal of light to medium contamination. Safe for use on most painted surfaces.. Solvent-free and biodegradable. Simply rinse away or mop up with absorbent granulesMain uses: Oil and grease impacted cementitious floorsUsage: Interior & exteriorSuitable for: Concrete, sand and cement, asphaltCoverage: Approx. 20m2 per 5 litresTools: Stiff BroomBuy BULK and SAVE: 1-2 packs 3-4 packs 5+ packsBio-D 5 litres: £30.50 £28.90 £27.40Bio-D 25 litres: £120.80 £114.70 £108.70Stiff Broom: £8.70Watco ConcroffEnvironmentally friendly emulsifying degreasantWatco Concroff has been specially formulated to give all the benefits of a powerful degreaser without the use of hazardous substances.. Penetrates even the thickest deposits of impacted grease. Simply rinse away or mop up with absorbent granules. Can also be used as a machine degreasantMain uses: Oil and grease impacted concrete floors, before applying a coatingUsage: Interior & exteriorSuitable for: Concrete and metal Coverage: Approx. 20m2 per 5 litresTools: Stiff broom 1-2 packs 3-4 packs 5+ packsConcroff 5 litres: £30.50 £29.00 £27.40Concroff 25 litres: £115.50 £109.70 £104.00Stiff Broom: £8.70Absorbent Granules 3 packs, absorbs 3 x 30 litres: £26.70-10%-10%-5%-5%Watco Adhesive RemoverAn extremely effective product for the removal of most types of adhesive commonly used on floors, including acrylic, asphalt and latex glues.Watco Adhesive Remover is a formulated solvent blend and is highly effective at softening and aiding the removal of glues generally found in the industrial environment. It saves labour time and reduces the need to hire costly abrasion equipment.. Reduces labour time and costs. Easy to use. Non abrasiveMain Uses:. Tile adhesive, Flooring and laminate adhesive, Black mastic, Tape and sticker residue, Chewing gumWatco Adhesive Remover 2.5 Litre £45.00Watco Industrial Floor CleanerA cost effective way to clean and protect your floor.This industrial grade cleaner will help to maintain the look and performance of epoxy resin and other paints. Cuts through grease and fats so is particularly good for commercial kitchens and food prep areas . Helps remove grease and tyre marks. Solvent free virtually odourless and biodegradable. Suitable for virtually all surfaces and environments. Supplied in concentrate to dilute with waterUse: InteriorsCoverage: 5 litres cleans 30m² of a non-porous surface, diluted 1/40 up to 1000m2Pack size: 5 litresTools: Stiff broomIndustrial Floor Cleaner 5 Litres £21.00Stiff broom: £8.70NEW

43For advice or to place an order Tel: 01483 418 418T: 01483 418 418E: sales@watco.co.ukF: 01483 428 888www.watco.co.ukFloor CoatingsPrimer & PreparationWatco Surface DPMAllows new concrete to be painted as little as 10 days after being laid Most surface coatings and other finishes can only be applied to dry floors. This means new concrete is normally left to dry for at least 4 weeks before painting. Usually, if concrete has dried for 10 days and the surface is reasonably hard and level without significant surface dampness, then Watco Surface DPM can be used. The top coating can then be applied within 48 hours.Watco Surface DPM will hold back construction moisture in new concrete and sand/cement subfloors to allow earlier painting. It will not hold back water or water vapour pressure that occurs if the subfloor damp proof membrane is missing or defective. . An easy to spread, low viscosity formula. Allows coatings to be used on concrete containing as much as 95% relative humidity. A solvent-free epoxy with good chemical resistanceUsage: Interior Suitable for: Concrete only Coverage: Approx. 12.5-15m2 per 6kg unitCoats: One coat usually requiredCuring time: 3-4 hours at 15-20°C. Can be overcoated the same dayTools: Notched trowel and rollerSurface DPM 6kg: £90.30Roller, frame & handle: £29.40Notched Trowel: £5.90Watco Oil Penetrating PrimerAllows hard to clean, contaminated surfaces to be paintedWatco Oil Penetrating Primer contains a solvent which works by penetrating the substrate and combining with oily residues. This also helps to bind together weaker surfaces. Watco Oil Penetrating Primer is intended for mineral oil residues such as motor oil or cutting oils. It is not usually suitable for vegetable, animal or synthetic oil residues. It will tolerate slight dampness in the substrate. Main uses: Specially developed to aid adhesion to porous fl oor surfaces that cannot be thoroughly cleanedUsage: InteriorSuitable for: Concrete, brick and masonry, and it will also work on timber surfaces. It is not suitable for use on non porous, previously painted surfaces or metal surfacesCoverage: Approx. 15-20m2 per 4 litresCoats: One coat is usually required. It should be overcoated with a wearing surface, e.g. Watco Epoxy Gloss Coat (p27)Curing time: 16 hours at 20°COil Penetrating Primer 4 litres £55.10Roller/Frame & Handle: £29.40Replacement Roller: £6.80Brush (5"): £6.30Now even oily floors can be prepared for painting!