39For advice or to place an order Tel: 01483 418 418T: 01483 418 418E: sales@watco.co.ukF: 01483 428 888www.watco.co.ukFloor CoatingsSpecialist Sealers Width Length PriceFibreglass Reinforcing Tape 75mm 50m £26.30Watco Bund SealerUnique formulation to seal and protect bund areas. Contains glass flake reinforcement for even greater resistance to chemical attack. Can be applied to damp surfaces. Waterproofs and protects. Helps to comply with the Control of Pollution (Oil Storage) RegulationsMain uses: Fills cracks between bund wall and floor, and provides a heavy duty chemical resistant coatingUsage: Interior & exterior Suitable for: Concrete, sand and cement, metal, asphaltCoverage: Approx. 4.5-6m2 per 3kg per coatCoats: One coat is usually sufficientThickness: 350-450 micronsResistant to: Excellent resistance to petrol, diesel, acids, alkalis and solventsCuring time: 16-24 hours at 15-20°C Buy BULK and SAVE: 1-4 packs 5-8 packs 9+ PacksBund Sealer 3kg: £67.20 £64.30 £62.90Roller/Frame & Handle: £29.40Replacement Roller: £6.80Brush (5"): £6.30Fibreglass Reinforcing Tape: 75mm x 50m £26.30Watco Fibreglass Reinforcing TapeStrengthen and waterproof joints in bund areas, floors etc.Watco Fibreglass Reinforcing Tape is usually used with Watco Bund Sealer when additional reinforcement is required over cracks and joints. Apply along the joint where the bund wall meets the bund fl oor, bedding into a wet coating of Watco Bund Sealer.. Waterproofs and strengthens vulnerable joints . Helps prevent bund areas developing leaks. Can be used with products other than Watco Bund Sealer if required. Easy to cut and use-10%-5%-BlackLight Grey

40Prices shown do Bring out the best in your asphalt!not include VATWatco Black TopA single application refurbisher for tarmac and asphalt Watco Black Top is a bitumen-based surface dressing which improves the appearance of grey, weathered asphalt. Please refer to Watco Asphalt Paint if a paint finish is required (opposite).. Covers old stains and marks. Upgrades drab asphalt surfaces. Quick and easy to apply by rollerMain uses: Car parks, drives, footpaths and roadsUsage: Exterior Suitable for: Asphalt and tarmacCoverage: 5-10m2 per 5 litres per coatCoats: One coat usually requiredCuring time: 2-5 hours at 5-20°C Black Top 5 litres: £36.50Roller/Frame & Handle: £29.40Replacement Roller: £6.80Soft Broom (12"): £8.70Asphalt Restorer 25kg: £52.50Notched Trowel: £6.20Stiff Broom (12"): £8.70BeforeAfterWatco Asphalt RestorerMake worn, pitted asphalt and tarmac surfaces look like newSimply pour and spread Watco Asphalt Restorer over worn, decayed asphalt surfaces to produce a sealed slip resistant, smart matt black finish. The blend of bitumen emulsion and aggregate produces a slip resistant finish.It is really easy to apply with a notched trowel, and quick drying so your area won't be out of commission for too long. Lightly drag a soft bristled broom back across the surface to flatten the ridges left by the trowel. The resulting fine brush marks help create an anti slip finish to the product.Uses: Paths, play areas, car parksCoverage: Approximately 12 - 15 m² per coat per 25 kg at 1.5 mm thick depending upon the substrateApplication: Dry, ambient conditions (above 10ºC and below 35ºC) Curing time : Foot traffic in 2 - 4 hours, vehicles 2-3 days in dry, warm conditionsPack size: 25kg containersCan be applied in 1-4 coats tosmooth worn asphaltAbsorbed into surface