37For advice or to place an order Tel: 01483 418 418T: 01483 418 418E: sales@watco.co.ukF: 01483 428 888www.watco.co.ukFloor CoatingsSeal & DustproofWatco Epoxy Floor-ShieldAn extremely tough, clear, two-part epoxy resin sealer for concrete subject to heavy industrial use. Solvent-free, virtually odourless. Dustproofs and toughens the concrete surface. Makes surfaces easier to clean. Tough, chemical resistant clear seal. Good resistance to oil and petrolIt will have a darkening effect on concrete depending upon the porosity of the substrate and number of coats appliedUsage: InteriorSuitable for: Concrete, sand and cement or woodCoverage: 30m2 per 5 litres per coatCoats: Two coats usually required Curing time: 12 hours at 15-20°C Watco Floor-ShieldA clear surface sealer for floors subject to general industrial use. Dustproofs and seals. Resists staining and makes cleaning easier. Minimal darkening effect on concrete and most surfaces. Odourless, solvent-free formulation. Micro-porous - allows substrate to breathe. Dries to a low sheen finishMain uses: Warehouses, factories, production areas where an easily cleaned, dustproofed surface is desirable Usage: Interior Suitable for: Concrete, sand and cement or woodCoverage: 40m2 per 5 litres per coatCoats: Two coats usually required Curing time: 12 hours at 15-20°C 1-2 packs 3-4 packs 5+ packsFloor-Shield 5 Litres £52.00 £49.40 £46.20Floor-Shield 25 Litres £209.00 £198.50 £188.00Roller/Frame & Handle: £29.40Replacement Roller: £6.80Brush (5"): £6.30Absorbed into surfaceBuy BULK and SAVE: 1-2 packs 3-4 packs 5+ packsEpoxy Floor-Shield 5 litres: £96.60 £91.80 £86.90Roller/Frame & Handle: £29.40Replacement Roller: £6.80Brush (5"): £6.30-10%-10%-5%-5%Watco Universal SealerHardens and dustproofs porous concrete and similar surfacesWatco Universal Sealer is a colourless liquid resin which penetrates deep into concrete or other porous materials to provide a dustproofed, hardened surface. It strengthens weak, dusty screeds and poor quality concrete. It also reduces porosity and dusting on brick, blockwork and plaster walls. Watco Universal Sealer is easily applied to new or old concrete surfaces using a soft broom. For non-porous surfaces we recommend Watco Floor-Shield (see below).. Solvent free - virtually odourless. Very easy to apply by broom. Micro-porous - allows substrate to breatheUsage: Interior & exterior Suitable for: Concrete, sand and cementCoverage: Approx. 30m2 per 5 litres per coat, depending on porosityCoats: One coat is usually sufficientCuring time: 12 hours at 15-20°CBuy BULK and SAVE: 1-3 packs 4-6 packs 7+ packsUniversal Sealer 5 litres: £47.30 £44.90 £42.50Universal Sealer 25 Litres: £204.80 £194.60 £184.30Soft Broom: £8.70-10%-5%-Penetratesand coats surfacePenetrates and leavesa thin film on surface

38Prices shown do Whatever the surface, Watco can seal it!not include VATBlock Paving Sealer 5 litres: £44.10Hammercoat Thinner/Cleaner (for cleaning equipment etc) 250ml: £3.80Roller/Frame & Handle: £29.40Brush (5"): £6.30Block Paving Stabiliser 25 litres: £152.30Foam Rubber Squeegee (handle not included): £9.20 Telescopic Handle: £8.90Watco Block Paving StabiliserLong term stabilisation of block pavement sand jointsWatco Block Paving Stabiliser has proved to be the answer to the problems associated with stabilising the essential jointing sand and helping to protect the integrity of block paved areas. It's even tough enough to withstand mechanical vacuum cleaning. This product was previously known as Watco Pavseel® Solvent Free.. Reduces wheel rutting and surface depressions. Reduces maintenance costs. Resists jointing sand removal. Inhibits weed growth. Solvent-freeUsage: Exterior Coverage: Approx. 55m2 per 25 litres, allowing for one applicationCoats: One coat is usually sufficientCuring time: 12 hours at 15-20°C Jointing sand held in place byWatco Block Paving StabiliserConcrete Block PaverWatco BlockPaving SealerEnhances and protects block pavingWatco Block Paving Sealer is a quick drying resin that gives a slight sheen to block paving. It enhances the colour and helps to prevent staining. Like Watco Block Paving Stabiliser, it also binds the jointing sand grains to one another and to the sides of pavers, which strengthens the paving.. Easy to apply using a roller. Tough, abrasive resistant surface. Reduces surface porosity and resists staining by oil, petrol etc.. Helps to prevent weeds growing between paving jointsUsage: Exterior Coverage: Approx. 12-15m² per coat per 5 litre pack, depending on the porosity of the pavers, block size and joint widthCoats: One coat is usually sufficientCuring time: 4 hours at 15-20°C TreatedUntreatedSqueegee - £8.75eachHandle - £8.90eachNew improved formula