35For advice or to place an order Tel: 01483 418 418T: 01483 418 418E: sales@watco.co.ukF: 01483 428 888www.watco.co.ukWatco Food Safe Coating & Watco Slip Resistant Food Safe CoatingA tough two pack floor coating designed for food preparation and storage areas.Food Safe Coating is a two part resin floor coating which is based on the latest polyaspartic resin technology. It provides a high quality, highly wear resistant coating that has been tested and has EN71/3 certification and a food taint test certificate.Ideal for normal kitchen environments, but also effective for cold food storage areas such as walk-in fridges as it cures in refrigerated areas (down to -10ºC).Uses: Interior and exterior Application: Concrete or sand and cement floors. Can be used on dry asphalt that is at least a month old. Also, wood, metal, fibreglass and existing coatings but test a small area first.Temperatures: Apply at temperatures between -10ºC and +30ºCCoverage: Approximately 25 m² per coat per 2.5L unit. Coverage will be reduced if the surface is textured or porous, or if the floor temperature is below 0ºCCuring times: Light traffic approximately 6-8 hours at 20°C Heavy traffic in approximately 12 hours at 20ºCCoats: Two coats usually requiredNB: Smooth concrete or concrete with surface laitance should be abraded or etched with Watco Cemtetch to ensure adequate adhesion. Watco Powerfloat Primer is recommended on powerfloated surfaces.Food Safe Coating 2.5 Litres £98.20Slip Resistant Food Safe Coating 2.5 Litres £102.90Short Pile Roller/Frame & Handle: £29.40Short Pile Replacement Roller: £6.80Plastic Scuttle: £5.90. Tested to EN71/3 as a non-toxic product. Takes heavy wear and tear. Fast curing, re-coatable in only 5 hours. Can be applied between -10ºC and 30ºC. Smooth or slip resistant options. Excellent chemical resistance. Steam cleanableFloor CoatingsSpecial CoatingsTile RedLight GreyWatco Protecta-Coat & WatcoProtecta-Coat SRAn exceptionally hard wearing protective coating, available in smooth or finely textured slip resistant grade (Protecta-Coat SR)Protecta-Coat is an exceptionally hard wearing two pack resin coating, which will protect your floors for the long term. It cures to a smart mid-gloss finish to enhance the look of your premises.. Protects coloured and decorative coatings from heavy wear and tear.. Can be applied at temperatures ranging from -10ºC to +30ºC.. Excellent chemical resistance, thus enhancing workplace safety. Suitable for internal and external use. Protecta-Coat SR has a slip resistant finishUse in a multitude of areas ranging from warehouses and showrooms to walk-in fridges and exterior car parking areas. Externally it will resist chalking, fading, weathering and has exceptional resistance to UV. All you need to do is to ensure the area to be coated is clean, dry and free from grease (see Watco Bio D p42).Use: Interiors and exteriorsAppearance: A two pack product which cures to a smart mid-gloss finishPack size: 2.5 litresCoverage: Approximately 30 m² Temperatures: Apply at temperatures between -10°C and +30°CCoats: One coat usually sufficient Curing times: Light traffic in 6-8 hours, heavy traffic in 12 hours at 20°CProtecta-Coat SR comes complete with a unit of fine aggregate that is added to the mix before application.Protecta-Coat 2.5 Litres £84.00Protecta-Coat SR (Slip Resistant) 2.5 Litres £89.30Short Pile Roller/Frame & Handle: £29.40Short Pile Replacement Roller: £6.80Plastic Scuttle: £5.90

36Prices shown do Seal, harden and dustproof concretenot include VATWatco Concrete SealerA quick drying, clear glossy lacquer for internal concrete floorsWatco Concrete Sealer gives an attractive lacquer finish to bare concrete and similar surfaces. It can also be used to protect existing sealed or painted surfaces (we can provide a test sample to check compatibility). . Provides a tough, scratch resistant, clear glossy finish. Chemical and abrasion resistant. Will tolerate regular use by forklift trucks. For use in well ventilated internal areas. Quick drying - a second coat can be applied in 8 hours. A moisture curing polyurethane solution with excellent chemical and abrasion resistanceMain uses: Factories, warehouses, workshops, garages etc, ideal for heavy wear environmentsUsage: Interior Suitable for: ConcreteCoverage: 40-45m2 per 5 litres per coatCoats: Two coats usually required Curing time: 12 hours at 15-20°CWatco Concrete Sealer 5 litres: £52.40Cleaning Solvent TH99 2.5 litres: £20.00Roller/Frame & Handle: £29.40Watco Concrete DustprooferA solvent-free, coloured sealer and surface hardener Unlike paint, Watco Concrete Dustproofer penetrates the surface of concrete, greatly increasing its durability and strength, and preventing the floor from creating dust. It also leaves a tough seal over the surface, which makes cleaning easier.. Tints and improves the appearance of concrete floors. Easy to apply with a broom. Seals and hardens new and old concrete floors, screeds and porous paving. Increases abrasion resistanceMain uses: Suitable for heavy use - ideal for warehouses and factories, drives, garages etc.Usage: Interior & exteriorSuitable for: Concrete, sand and cement or woodCoverage: 40-50m2 per 5 litresCoats: One coat is usually sufficient Curing time: 4 hours at 15-20°CTools: Soft broomConcrete Dustproofer 5 litres: £57.80Soft Broom: £8.70Penetratesand coats surfacePenetrates and leavesa thin film on surfaceSandLight Grey