34Prices shown do Tough coatings for tough environments!not include VAT2Apply the fl ake1Apply base coat3Apply top coatFinished Floor SurfaceYour colour options:Decorative Floor System Epoxicoat 4.5kg: £93.60Flake per colour 1kg: £15.80Protecta-Coat SR 2.5 Litre: £89.30Please state colour of coating and flakes when ordering.Roller/Frame & Handle: £29.40Replacement Roller: £6.80Watco Decorative Floor SystemA high performance, anti slip decorative floor coating systemDecorative Floor System provides a durable, attractive floor finish.Firstly a coloured, high build epoxy resin floor coating is applied followed by a sprinkled flake mix (colours of your choice). 24 hours later a quick drying anti slip protective clear coating is applied, which will resist wear and tear and UV fading. Choose a Base Colour and then one or more of the Flake Options to create your own effect. Different coloured Flake Options are easily mixed together.. Heavy duty, epoxy resin base with UV stable polyaspartic finish. Brightens up drab, dark areas. Excellent chemical and abrasion resistance. Lightly textured anti slip finish. Suitable for heavy use including fork lift trucks. Flecked finish helps hide blemishes in concrete sub floorsUsage: Interior & exteriorCoverage: Base coat (Watco Epoxicote) approx 15m² per 4.5kg Flake (one colour) approx 15m² per 1kg Top coat (Watco Protecta-Coat SR) approx 30m² per 2.5 litreCoats: One coat usually requiredCuring time: Base coat, 24 hours at 15°C, Top coat, 15-20 hours at 15°C1Select your base colour2Select your fl ake or combination of fl akesSamplesSafety YellowGreenGrey/BlueMid GreyMid GreyBlue MixMaroonLight Grey BaseWith Blue Mix FlakeMid Grey Base With Blue Mix and Maroon FlakeTile Red Base With Grey/Blue and Maroon FlakeTile RedBlackDark GreyMid BlueLight GreyStone

35For advice or to place an order Tel: 01483 418 418T: 01483 418 418E: sales@watco.co.ukF: 01483 428 888www.watco.co.ukWatco Food Safe Coating & Watco Slip Resistant Food Safe CoatingA tough two pack floor coating designed for food preparation and storage areas.Food Safe Coating is a two part resin floor coating which is based on the latest polyaspartic resin technology. It provides a high quality, highly wear resistant coating that has been tested and has EN71/3 certification and a food taint test certificate.Ideal for normal kitchen environments, but also effective for cold food storage areas such as walk-in fridges as it cures in refrigerated areas (down to -10ºC).Uses: Interior and exterior Application: Concrete or sand and cement floors. Can be used on dry asphalt that is at least a month old. Also, wood, metal, fibreglass and existing coatings but test a small area first.Temperatures: Apply at temperatures between -10ºC and +30ºCCoverage: Approximately 25 m² per coat per 2.5L unit. Coverage will be reduced if the surface is textured or porous, or if the floor temperature is below 0ºCCuring times: Light traffic approximately 6-8 hours at 20°C Heavy traffic in approximately 12 hours at 20ºCCoats: Two coats usually requiredNB: Smooth concrete or concrete with surface laitance should be abraded or etched with Watco Cemtetch to ensure adequate adhesion. Watco Powerfloat Primer is recommended on powerfloated surfaces.Food Safe Coating 2.5 Litres £98.20Slip Resistant Food Safe Coating 2.5 Litres £102.90Short Pile Roller/Frame & Handle: £29.40Short Pile Replacement Roller: £6.80Plastic Scuttle: £5.90. Tested to EN71/3 as a non-toxic product. Takes heavy wear and tear. Fast curing, re-coatable in only 5 hours. Can be applied between -10ºC and 30ºC. Smooth or slip resistant options. Excellent chemical resistance. Steam cleanableFloor CoatingsSpecial CoatingsTile RedLight GreyWatco Protecta-Coat & WatcoProtecta-Coat SRAn exceptionally hard wearing protective coating, available in smooth or finely textured slip resistant grade (Protecta-Coat SR)Protecta-Coat is an exceptionally hard wearing two pack resin coating, which will protect your floors for the long term. It cures to a smart mid-gloss finish to enhance the look of your premises.. Protects coloured and decorative coatings from heavy wear and tear.. Can be applied at temperatures ranging from -10ºC to +30ºC.. Excellent chemical resistance, thus enhancing workplace safety. Suitable for internal and external use. Protecta-Coat SR has a slip resistant finishUse in a multitude of areas ranging from warehouses and showrooms to walk-in fridges and exterior car parking areas. Externally it will resist chalking, fading, weathering and has exceptional resistance to UV. All you need to do is to ensure the area to be coated is clean, dry and free from grease (see Watco Bio D p42).Use: Interiors and exteriorsAppearance: A two pack product which cures to a smart mid-gloss finishPack size: 2.5 litresCoverage: Approximately 30 m² Temperatures: Apply at temperatures between -10°C and +30°CCoats: One coat usually sufficient Curing times: Light traffic in 6-8 hours, heavy traffic in 12 hours at 20°CProtecta-Coat SR comes complete with a unit of fine aggregate that is added to the mix before application.Protecta-Coat 2.5 Litres £84.00Protecta-Coat SR (Slip Resistant) 2.5 Litres £89.30Short Pile Roller/Frame & Handle: £29.40Short Pile Replacement Roller: £6.80Plastic Scuttle: £5.90