33For advice or to place an order Tel: 01483 418 418T: 01483 418 418E: sales@watco.co.ukF: 01483 428 888www.watco.co.ukWatco Chemi-CoatA tough epoxy resin coating with excellent chemical resistanceWatco Chemi-Coat is a one coat, high build epoxy resin coating which offers excellent durability and chemical resistance. It provides a superb glossy, hygienic and easily cleaned surface. It is ideal for areas where chemical spillage may occur, such as battery charging areas.. Superior resistance to many chemicals - ideal for bund areas. Suitable for a variety of floor and wall surfaces . Solvent-free and odourlessUsage: Interior Suitable for: Concrete, sand and cement or wood Resistant to: Petrol, 25% Lactic Acid, Diesel Fuel, 10% Hydrochloric Acid, Xylene, 10% Nitric Acid, Salt, 25% Sulphuric Acid, White Spirit, 20% Phosphoric Acid, Bleach, 10% Citric Acid, 20% Ammonia, 20% Caustic Soda, Anti Freeze, Sugar Solutions, Mineral Oil, 10% Oxalic Acid, Detergents, 5% Acetic Acid, Methylated SpiritsCoverage: Approx. 18m2 per 4.5 litres per coatCoats: One coat is usually sufficientCuring time: Will accept light traffic in 16 hours at 15-20°C Normal traffic in 24 hours at 15-20°CPrimer: Use 4-Hour Epoxy Primer (p44) on very porous surfaces or Powerfloat Primer (p44) on powerfloated floors Watco Chemi-Coat RapidA rapid curing version of our best seller. Easy to mix two-part epoxy resin formula. Cures rapidly to form a high build (250-300 micron thick) glossy coating. Hard wearing surface ideal for heavy wear areas. Solvent-free formula which can be used over most existing paints and coatingsNote: Colours shown will not exactly match the colours of Chemi-Coat (opposite).Usage: Interior Suitable for: Concrete, sand and cement or woodResistant to: Petrol, 25% Lactic Acid, Diesel Fuel, 10% Hydrochloric Acid, Xylene, 10% Nitric Acid, Salt, 25% Sulphuric Acid, White Spirit, 20% Phosphoric Acid, Bleach, 10% Citric Acid, 20% Ammonia, 20% Caustic Soda, Anti Freeze, Sugar Solutions, Mineral Oil, 10% Oxalic Acid, Detergents, 5% Acetic Acid, Methylated SpiritsCoverage: Approx. 14m2 per 3 litres per coatCoats: One coat; two coats can be applied in one day if requiredCuring time: Will accept light traffic in 5 to 6 hours at 15-20°CNormal traffic in 16 hours at 15-20°CPrimer: Use 4-Hour Epoxy Primer (p44) on very porous surfaces or Powerfloat Primer (p44) on powerfloated floors Floor CoatingsChemical Resistant 1 pack 2-4 packs 5+ packsChemi-Coat Rapid 3 litres: £125.00 £118.80 £112.50Roller/Frame & Handle: £29.40Replacement Roller: £6.80-10%-5%Mid BlueMid BlueTerracottaLight GreyLight GreyMid GreenDark GreyTile RedTile RedMid GreyMid Grey 1 pack 2-4 packs 5+ packsChemi-Coat 4.5 litres: £150.20 £142.70 £135.10Roller/Frame & Handle: £29.40Replacement Roller: £6.80-10%-5%Buy BULK and SAVE:PricesBuy BULK and SAVE:PricesGreat chemicalresistance

34Prices shown do Tough coatings for tough environments!not include VAT2Apply the fl ake1Apply base coat3Apply top coatFinished Floor SurfaceYour colour options:Decorative Floor System Epoxicoat 4.5kg: £93.60Flake per colour 1kg: £15.80Protecta-Coat SR 2.5 Litre: £89.30Please state colour of coating and flakes when ordering.Roller/Frame & Handle: £29.40Replacement Roller: £6.80Watco Decorative Floor SystemA high performance, anti slip decorative floor coating systemDecorative Floor System provides a durable, attractive floor finish.Firstly a coloured, high build epoxy resin floor coating is applied followed by a sprinkled flake mix (colours of your choice). 24 hours later a quick drying anti slip protective clear coating is applied, which will resist wear and tear and UV fading. Choose a Base Colour and then one or more of the Flake Options to create your own effect. Different coloured Flake Options are easily mixed together.. Heavy duty, epoxy resin base with UV stable polyaspartic finish. Brightens up drab, dark areas. Excellent chemical and abrasion resistance. Lightly textured anti slip finish. Suitable for heavy use including fork lift trucks. Flecked finish helps hide blemishes in concrete sub floorsUsage: Interior & exteriorCoverage: Base coat (Watco Epoxicote) approx 15m² per 4.5kg Flake (one colour) approx 15m² per 1kg Top coat (Watco Protecta-Coat SR) approx 30m² per 2.5 litreCoats: One coat usually requiredCuring time: Base coat, 24 hours at 15°C, Top coat, 15-20 hours at 15°C1Select your base colour2Select your fl ake or combination of fl akesSamplesSafety YellowGreenGrey/BlueMid GreyMid GreyBlue MixMaroonLight Grey BaseWith Blue Mix FlakeMid Grey Base With Blue Mix and Maroon FlakeTile Red Base With Grey/Blue and Maroon FlakeTile RedBlackDark GreyMid BlueLight GreyStone