32Prices shown do Where there are chemicals, let there be Chemi-Coat!not include VATWatco Chemi-Coat Acid StrengthOur ultimate chemical resistant coating. Contains novolac resin for superior chemical resistance. Resists up to 98% Sulphuric Acid. Thick coating is ideal for chemical bund areas. Smooth, glossy, wipe clean surface. Heavy duty high build formulaUsage: Interior Suitable for: Concrete, sand and cement or wood Resistant to: 98% Sulphuric AcidCoverage: Approx. 18m2 per 4.5 litres per coatCoats: One coat is usually sufficientCuring time: Will accept light traffic in 16 hours at 15-20°C Normal traffic in 24 hours at 15-20°CPrimer: Use 4-Hour Epoxy Primer (p44) on very porous surfaces or Powerfloat Primer (p44) on powerfloated floorsOriginally formulated in 1972, we have developed our best selling chemical resistant coating into a wide range including a new fast curing version, and a version that offers our highest strength yet - up to 98% sulphuric acid resistance.Watco Slip Resistant Chemi-CoatImprove safety in chemical spillage areas. Tough epoxy resin base resistant to many chemicals. Hard aluminium oxide grit for maximum wear resistance. Solvent-free formulaEasy to use - simply roller one high build coat onto the floor then scatter the aluminium oxide grit over the surface while the coating is still wet. Usage: Interior Suitable for: Concrete, sand and cement, metal or woodResistant to: A wide range of acids and other chemicalsCoverage: Approx. 18m2 per 4.5 litres per coatCoats: One coat is usually sufficientCuring time: Will accept light traffic in 16 hours at 15-20°C Normal traffic in 24 hours at 15-20°CSlip Resistant Chemi-Coat 4.5 litres: £160.70Roller/Frame & Handle: £29.40Replacement Roller: £6.80Mid BlueTerracottaLight GreyMid GreenTile RedMid GreyMid BlueTerracottaLight GreyMid GreenTile RedMid Grey 1 pack 2-4 packs 5+ packsChemi-Coat Acid Strength 4.5 litres: £167.00 £158.70 £150.30Roller/Frame & Handle: £29.40Replacement Roller: £6.80-10%Buy BULK and SAVE:-5%PricesGood resistance to acids, alkalis solvents, petrol and diesel

33For advice or to place an order Tel: 01483 418 418T: 01483 418 418E: sales@watco.co.ukF: 01483 428 888www.watco.co.ukWatco Chemi-CoatA tough epoxy resin coating with excellent chemical resistanceWatco Chemi-Coat is a one coat, high build epoxy resin coating which offers excellent durability and chemical resistance. It provides a superb glossy, hygienic and easily cleaned surface. It is ideal for areas where chemical spillage may occur, such as battery charging areas.. Superior resistance to many chemicals - ideal for bund areas. Suitable for a variety of floor and wall surfaces . Solvent-free and odourlessUsage: Interior Suitable for: Concrete, sand and cement or wood Resistant to: Petrol, 25% Lactic Acid, Diesel Fuel, 10% Hydrochloric Acid, Xylene, 10% Nitric Acid, Salt, 25% Sulphuric Acid, White Spirit, 20% Phosphoric Acid, Bleach, 10% Citric Acid, 20% Ammonia, 20% Caustic Soda, Anti Freeze, Sugar Solutions, Mineral Oil, 10% Oxalic Acid, Detergents, 5% Acetic Acid, Methylated SpiritsCoverage: Approx. 18m2 per 4.5 litres per coatCoats: One coat is usually sufficientCuring time: Will accept light traffic in 16 hours at 15-20°C Normal traffic in 24 hours at 15-20°CPrimer: Use 4-Hour Epoxy Primer (p44) on very porous surfaces or Powerfloat Primer (p44) on powerfloated floors Watco Chemi-Coat RapidA rapid curing version of our best seller. Easy to mix two-part epoxy resin formula. Cures rapidly to form a high build (250-300 micron thick) glossy coating. Hard wearing surface ideal for heavy wear areas. Solvent-free formula which can be used over most existing paints and coatingsNote: Colours shown will not exactly match the colours of Chemi-Coat (opposite).Usage: Interior Suitable for: Concrete, sand and cement or woodResistant to: Petrol, 25% Lactic Acid, Diesel Fuel, 10% Hydrochloric Acid, Xylene, 10% Nitric Acid, Salt, 25% Sulphuric Acid, White Spirit, 20% Phosphoric Acid, Bleach, 10% Citric Acid, 20% Ammonia, 20% Caustic Soda, Anti Freeze, Sugar Solutions, Mineral Oil, 10% Oxalic Acid, Detergents, 5% Acetic Acid, Methylated SpiritsCoverage: Approx. 14m2 per 3 litres per coatCoats: One coat; two coats can be applied in one day if requiredCuring time: Will accept light traffic in 5 to 6 hours at 15-20°CNormal traffic in 16 hours at 15-20°CPrimer: Use 4-Hour Epoxy Primer (p44) on very porous surfaces or Powerfloat Primer (p44) on powerfloated floors Floor CoatingsChemical Resistant 1 pack 2-4 packs 5+ packsChemi-Coat Rapid 3 litres: £125.00 £118.80 £112.50Roller/Frame & Handle: £29.40Replacement Roller: £6.80-10%-5%Mid BlueMid BlueTerracottaLight GreyLight GreyMid GreenDark GreyTile RedTile RedMid GreyMid Grey 1 pack 2-4 packs 5+ packsChemi-Coat 4.5 litres: £150.20 £142.70 £135.10Roller/Frame & Handle: £29.40Replacement Roller: £6.80-10%-5%Buy BULK and SAVE:PricesBuy BULK and SAVE:PricesGreat chemicalresistance