28Prices shown do Epoxy resins for every floor!not include VATWatco High Build EpoxyOur glossiest, toughest epoxy resin coating Our highest performance roller applied floor coating. It will provide a glossy, hygienic and easy to clean surface which is resistant to very heavy wear and a wide range of chemicals. . High gloss finish. Excellent chemical resistance. Solvent-free formula, virtually odourless . High build formula, up to 200 microns thick in one coat. 100% solids epoxy resin formulaMain uses: Showrooms, warehouses and any heavily trafficked areas where chemicals may be spilledUsage: Interior Suitable for: Concrete, wood or metalResistant to: Oil, solvents and harsh cleaning chemicalsCoverage: Approx. 18m2 per 4.5 litres per coatCoats: One coat is usually sufficientCuring time: Light traffic after 12-16 hours at 15-20°CPrimer: Use 4-Hour Epoxy Primer (p44) on very porous surfaces or Powerfloat Primer on powerfloated floors 1 pack 2-4 packs 5+ packsHigh Build Epoxy 4.5 litres: £146.00 £138.70 £131.40Roller/Frame & Handle: £29.40Replacement Roller: £6.80Buy BULK and SAVE:PricesBuy BULK and SAVE:Prices-10%-10%-5%--5%-Mid BlueLight GreyMid GreenTile RedMid GreyTerracottaWatco Fast CuringEpoxy CoatingFor heavily trafficked floors that need to be used again quickly. Two pack epoxy resin formula with tough gloss fi nish. High build one coat system with good chemical resistance. Solvent-free formula can be applied over existing paintIn common with most epoxy resin coatings, full chemical and wear resistance is gradually achieved over 7 days. A slip resistant version is now available (p54)Main uses: Production areas, warehouses and other heavy wear areasUsage: Interior Suitable for: Concrete, wood or metalResistant to: Oil, solvents and harsh cleaning chemicalsCoverage: Approx. 14m2 per 3 litres per coatCoats: One coat is usually sufficientCuring time: Light traffi c after 4-5 hours and normal traffi c after 12 hours (at 20°C)Primer: Very porous surfaces should be primed with Watco 4-Hour Epoxy Primer (p44) 1-2 packs 3-4 packs 5+ packsFast Curing Epoxy Coating 3 litres: £122.90 £116.80 £110.60Roller/Frame & Handle: £29.40Replacement Roller: £6.80Mid BlueLight GreyTile RedMid Grey Ready for light traffic in 5 hours

29For advice or to place an order Tel: 01483 418 418T: 01483 418 418E: sales@watco.co.ukF: 01483 428 888www.watco.co.ukWatco Resiflow - New FormulaA 1-2mm thick self levelling epoxy resin coatingWatco Resiflow is an excellent choice for heavy wear areas. Simply mix and pour, then spread with a Resiflow applicator and the product 'self levels' to a hardwearing surface. Running a spiked roller over the surface prevents air bubbles. Our new formula will tolerate some damp, which can be useful if the floor has been washed down prior to application. The thick, satin coating helps fill and disguise imperfections in the floor. Self levelling epoxy coatings generally need a primer, but this formula does not - it can be applied directly to bare concrete or existing well-bonded paint.. Seamless, smooth satin finish. Water based formula. No primer needed. New, easy to use formula . Exceptional wear resistanceMain uses: Floors in processing and manufacturing plants, wet areas, workshops, showrooms etcUsage: InteriorSuitable for: ConcreteResistant to: Detergents, petrol, diesel fuel, xylene, methylated spirits, white spirit, bleach, anti-freeze, mineral oil, sugar solutions, and saltCoverage: 5-10m² per 20kgDepth: 1-2mm thickCoats: One coat is usually sufficientCuring time: 24 hours at 15-20°CPour the mixed producton to the substrateSpread with theResiflow applicatorFinish with a spiked roller to prevent air bubblesFloor CoatingsHeavy UseMid BlueMid BlueLight GreyTile Red 1-2 packs 3-4 packs 5+ packsResiflow - New Formula 20kg: £97.70 £89.30 £83.00Resiflow applicator: £21.00Spiked Roller: £15.20Telescopic Extension Handle: £8.90Buy BULK and SAVE:Prices-10%-15%