124Prices shown do ISO 9001 quality certificationnot Watco RoofsafeFlexible, waterproof, slip resistant surface for roofsThe colours can be used to indicate clearly where access is permitted on the roof. The thick, fl exible formulation also makes an ideal emergency repair since it can be applied in the wet and is immediately water repellent.. Solvent based acrylic reinforced with fi bre. Tough, fl exible 'high build' formulation bridges splits and cracks up to 2mm wideMain uses: Seals and weatherproofs most surfaces and provides a tough, slip resistant fi nishSuitable for: Asphalt, bitumen based surfaces, roofi ng felt, roofi ng sheets, asbestos, plastic, brick and metalCoverage: Approx. 10m2 per 5kgDrying time: 4-6 hours at 15-20°C Coats: One coat is usually suffi cient 1-3 packs 4-6 packs 7+ packsRoofsafe 5kg: £62.90 £59.80 £56.60Roofsafe 20kg (Mid Grey Only): £209.00 £198.50 £188.00Roller/Frame & Handle: £29.40Replacement Roller: £6.80Brush (5"): £6.301 coat applicationinclude VATTop coatBase coat(s)SubstrateOptional anti slip texture in top coatBuy BULK and SAVE:PricesMid GreyBlackGreenTile RedWatco Balcony Coating SystemNEWA flexible, waterproofing system with an optional slip resistant finishOnce the protective surface of a balcony becomes worn or cracked, water can easily penetrate and damage the concrete deck beneath. This will inevitably lead to cracks which can cause damage to property and homes. Watco Balcony Coating System provides a fl exible, hard wearing and slip resistant surface fi nish to balconies and walkways. It is applied as a highly fl exible base coat with a polyurethane top coat for good wear resistance. As a liquid waterproofi ng system it can be used to protect around pipes, rainwater outlets and protrusions more easily than sheet materials. It also seals the surface without joints or seams. We recommend cracks and fl oor/wall joints are bridged with fi breglass tape in conjunction with two layers of base coat. The smooth fi nish can be made anti slip by sprinkling a fi ne aggregate into the wet coating if required. Excellent waterproofi ng properties. Permanently fl exible - will not split with movement of the substrate. Resistant to weathering and the effects of UV exposure. Optional slip resistant fi nish using grit supplied in each packMain uses: Waterproof and protect external walkways and balconiesSuitable for: Sound asphalt, fi bre cement, concrete or weathered bituminous surfacesThickness: Approx. 1-2mmCoverage: Base coat - approx. 10m² per coat per 10L Top coat - approx 10m² per coat per 3LDrying time: Touch dry in approx. 4 hours, withstands light traffi c in 8 hours at 15-20°CCoats: One coat for the base coat (for substrates in good condition) and one coat for the top coat 1 pack 2+ packsBase Coat 10L: £136.50 £131.30Top Coat 3L: £47.30 £44.10Fibreglass Reinforcing Tape 75mm x 50m: £26.30Roller, Frame & Handle: £29.40Brush (5"): £6.30Grey

125For advice or to place an order Tel: 01483 418 418T: 01483 418 418E: sales@watco.co.ukF: 01483 428 888www.watco.co.ukRoofingWatco Liquid Roof Resurfacing and anti slipMembraneRoller applied, tough polyurethane membrane to seal flat and pitched roofsWatco Liquid Roof Membrane is a roller applied coating system designed to protect fl at and pitched roofs. With an inert fi bre reinforcement it protects around these areas where the risk of water leakage is high. Two coats will cure to give a tough, 1-1.5mm thick sealing membrane. Its high elasticity allows the roof to move without the membrane splitting or cracking. . Seamless fi nish. UV stable. Moisture cured. Can be applied to slightly damp surfaces. Membrane moves with the roof to reduce splitting. Seals areas surrounding roof protrusions. Allows substrate to breathe and release vapours. Cold applied - no heating equipment requiredMain uses: Seals roofs against water ingressSuitable for: Flat and pitched roofs, concrete, asphaltCoverage: Approx. 5-7m2 per 5 litres per coat Approx. 12-16m2 per 12.5 litres per coatDrying time: 4 hours at 20°CCoats: Two coats usually required 5 Litres 12.5 LitresLiquid Roof Membrane: £84.00 £209.00Roller/Frame & Handle: £29.40Replacement Roller: £6.80Brush (5"): £6.30Watco Anti Slip Liquid Roof MembraneFor safer maintenance or emergency access across roofsA cold applied, tough liquid membrane to seal roofs with the added benefi t of a coarse, slip resistant surface. Apply a base coat of Watco Liquid Roof Membrane (above), followed by a top coat of Anti Slip Liquid Roof Membrane. Sprinkle the grit supplied with the Anti Slip Liquid Roof Membrane onto the second coat before it cures to give a hardwearing, coarse, slip resistant surface.. Uses fi bre reinforcement in a thick polyurethane coating to create a long-lasting, fl exible seal. Extremely fl exible to withstand the natural expansion and contraction of the roof structure. Tough aluminium oxide grit for a hard wearing, coarse slip resistant surface. UV stable. Ideal for roofs where water tends to pool or where algae growsMain uses: For safer maintenance work or emergency access in all weather conditionsSuitable for: Concrete, asphalt, roofi ng feltCoverage: Approx. 5-7m2 per 5 litres per coat Approx. 12-16m2 per 12.5 litres per coatDrying time: 4 hours at 20°C Coats: Two coats usually required 5 Litres 12.5 LitresAnti Slip Liquid Roof Membrane (top coat): £92.40 £215.00Liquid Roof Membrane (base coat): £84.00 £209.00Roller/Frame & Handle: £29.40Replacement Roller: £6.80Brush (5"): £6.30Flexible CoatingLight Grey