110Prices shown do No account necessarynot include VATMoisture vapour can pass through coatingWatco Weatherguard 10Decorative, flexible weatherproofing for wallsWatco Weatherguard 10 cures to a weatherproof and impact resistant fi nish. This tough elastomeric membrane is capable of withstanding up to 10 years or more of extreme weather and temperature changes.. Easy clean surface. Breathable and fl exible allowing surface movementMain uses: Decorative, elastomeric, solar refl ective, anti fungal exterior wall coatingUsage: ExteriorSuitable for: Brickwork, concrete, masonry, tiles, woodCoverage: Approx. 40m2 per 10 litres per coatCuring time: Touch dry in 4-6 hours at 20°CCoats: One to two coats depending on texture of substrate 1 Pack 2+ PacksWeatherguard 10 10 litres: £104.00 £93.509" Roller and Tray: £7.50Brush (5"): £6.30CreamWhiteBuy BULK and SAVE:PricesStretch Capacityx2Treated - rain is repelledUntreated - rain penetratesWatco RainshieldA water repellent to protect exterior brickwork and concrete from rain and frost damageWatco Rainshield treated surfaces can repel rain and damp even in the most exposed environments.. Clear treatment with minimal darkening effect on substrate. Helps prevent frost spalling and crumblingMain uses: Protects porous masonry and other surfaces from rain, penetrating damp and stainingUsage: ExteriorSuitable for: Brickwork, masonry, wood, plaster and other porous surfacesCoverage: Approx. 25m2 per 5 litresDrying time: 24 hoursCoats: One coat is usually suffi cient: 5 litres 25 litresRainshield: £36.80 £141.80Brush (5"): £6.30

111For advice or to place an order Tel: 01483 418 418T: 01483 418 418E: sales@watco.co.ukF: 01483 428 888www.watco.co.ukDamp ProofingTough products to combat dampWatco All Weather Masonry PaintA quality masonry paint with a smooth matt finish that is shower resistant in one hourNow you can carry out external decoration at practically any time of the year. Watco All Weather Masonry Paint is a quality exterior paint based on tough Pliolite resin and solvents. . Can be applied as low as 5?C. Attractive smooth matt fi nish. Permeable to moisture vapour so it allows masonry to breathe. Flexes with surface movementMain uses: Exterior masonry coating ideal for use in changeable weather conditionsSuitable for: Concrete, cement render, pebble dashed substrates etc.Coverage: Approx. 40m² per 5 litre pack, depending on the porosity and texture of the substrate Curing time: Touch dry in 1 hour and can be overcoated in 4 hours at 20?C. Showerproof in 1 hour at 20?C, or 2 hours at 10°CCoats: Two coats usually requiredAll Weather Masonry Paint 5 litres: £49.609" Roller and Tray: £7.50Brush (5"): £6.30Watco Masonry WaterprooferAn advanced, clear waterproofer for exterior wallsWatco Masonry Waterproofer is easier to apply and penetrates much deeper than traditional liquid systems. It can penetrate brickwork by up to 12mm, giving better protection against wind-driven rain. It does not block pores, but lines them with silanes and siloxanes which repel water but still allow the substrate to breathe.. Easy to use cream formula - can be applied by roller. Penetrates more deeply than conventional water repellents. Improves thermal efficiency on cold and damp buildingsMain uses: To protect masonry from rain and penetrating dampnessUsage: ExteriorSuitable for: Bricks, mortar and stoneCoverage: Approx. 25m² per 5 litresDrying time: Turns clear in 1 to 2 hours, fully penetrated and transparent in 24-48 hoursCoats: One coat is usually sufficientMasonry Waterproofer 5 litres: £99.809" Roller and Tray: £7.50Brush (5"): £6.30Watco Masonry Waterproofer looks white immediately after application, so it is easy to tell which areas have not been treated.After 24-48 hours the wall will have returned to its original appearance.NEWWhite