Technical Guide Pages 95 - 97CADSpecification SupportCAD DRAWINGSwww.bauder.co.uk/technical-centreNBS SPECIFICATIONSwww.bauder.co.uk/technical-centreTECHNICAL HELPLINET: +44 (0)1473 257671E: technical@bauder.co.ukPROJECTS PORTFOLIOE: marketing@bauder.co.ukW: www.bauder.co.uk/media-centre91 bauder.co.ukCOLD APPLIEDSYSTEMSLiquid Applied Balcony, Walkway and Terrace SystemsThe Bauder balcony, walkway and terrace systems were developed to provide the optimum combination of aesthetic and functional requirements The systems are designed to be slip resistant and hard wearing, and can also be used for stairs and stairwells.These cold liquid applied systems are based on the most advanced German polymer chemistry and are suitable for both new build and refurbishment projects, as either cold roof or inverted roof design.KEY FEATURESn Suitable for New Build and Refurbishmentn Totally cold appliedn Exceptionally rapid cure timesn Seamless with no fixingsn Thick layer systemn Flexiblen Anti-skidn Fully bonded with excellent inter-layer adhesionn Fire and chemical resistantn Tough and durable enough to withstand all types of balcony trafficn Can be installed all year round in the majority of climatic conditionsn Compatible with almost all substratesn Free of solvents, isocyanates and halogensn Quick and simple to installn Can be overlaid or repaired as required at any time in the futuren Guaranteed for 10 years.New BuildThe system is suitable for application over almost all substrates commonly used for balcony, walkway and terrace construction. Because the material is cold applied from the drum using very basic equipment this avoids hoisting heavy plant associated with asphalt or hot melt systems to roof level. Cold application avoids the risks associated with hot works on site.RefurbishmentThe system can be applied directly to asphalt and most other waterproofing and surfacing products typically found on existing balconies, walkways and terraces. This avoids the unnecessary expense, risk and disruption of removing existing waterproofing and minimises installation time on site. Cold application and exceptionally fast cure times are a distinct advantage when carrying out work on areas continuously in use by the buildings occupants; inconvenience is kept to a minimum.The system is available in the following colours.. Stone Grey RAL 7030. Blue Grey RAL 7031. Traffic Grey RAL 7043

bauder.ieSYSTEM CONFIGURATIONSThe Bauder balcony, walkway and terrace systems are totally cold applied, so avoiding the hazards often associated with hot works. During installation, access restrictions are minimised as the systems achieve full mechanical properties exceptionally quickly and all layers of the systems can be trafficked within a few hours after installation. The waterproofing and surfacing layers are designed to be tough and durable to withstand the specific demands of the balcony, walkway and terrace environment. They are designed for high levels of traffic, with a REINFORCED SYSTEMThe Bauder cold liquid applied, fully reinforced balcony, walkway and terrace surfacing system is used wherever there are occupied premises beneath. It is especially suitable for the overlay of failed or worn asphalt, helping to avoid the costs, disruption and risks associated with its removal.Cryl Finish 205 is an abrasion resistant system seal coat.RS233 Deck Floor Layer is a self levelling surface layer with large grain, hard wearing crystal quartz aggregate.ProTerra is an ETA certified reinforced waterproofing layer, fully reinforced with Bauder 110g reinforcement fleece, a tough polyester fabric.Cryl Primer 222 or 276 used to seal the substrate and to improve adhesion.Substrate Base - (eg. asphalt, concrete, timber).heavy duty crystal quartz filled wearing course. The aggregate is tightly bound within the resin matrix and provides both the wearing layer anti skid properties and long term resistance to impacts and damage.Unlike more commonly available coatings, the PMMA resins used achieve excellent substrate and inter-layer adhesion, do not suffer inter-layer delamination and have excellent resistance to the day to day forces imposed on balcony, walkway and terrace systems.UNREINFORCED SYSTEMThe Bauder cold applied unreinforced system is used over unoccupied premises, such as cantilevered structures. Reinforcement is still used to upstands and to cope with any details, as structural movement may occur.Cryl Finish 205 is an abrasion resistant system seal coat.RS233 Deck Floor Layer is a self levelling surface layer with large grain, hard wearing crystal quartz aggregate.Cryl Primer 222 or 276 used to seal the substrate and to improve adhesion.Substrate Base - (eg. asphalt, concrete, timber).ALTERNATIVE SURFACING / INSULATIONPaving or timber decking can be used over the reinforced waterproofing layer if preferable, with the addition of a slip layer and protection layer to prevent the possibility of mechanical damage.Paving, on supports or screed, or timber decking.Bauder U-Max or BauderJFRI Vapour Permeable Membrane, designed to increase the thermal capacity of the insulation whilst preventing fines from working their way beneath.Bauder XPS or BauderJFRI Inverted Insulation Where it is necessary to provide an insulated solution.Bauder Filter FleeceProTerra, is an ETA certified reinforced waterproofing layer, fully reinforced with Bauder 110g reinforement fleece, a tough polyester fabric.Cryl Primer 222 or 276 used to seal the substrate and to improve adhesion.Substrate - ( eg. asphalt, concrete, timber).92