bauder.ie86BAUDER LIQUITEC ROOF SYSTEMETA CERTIFICATION - CE MARKINGThe products used within the Bauder LiquiTEC Roof System are tested and certified under ETAG 005 - Liquid Applied Waterproofing Membranes issued by the European Organisation for Technical Approvals (EOTA). Products are deemed fit for their intended use if they comply with the relevant European Technical Approval. A construction product with an ETA can carry CE marking and can be placed on the market in any EU member state.Fire ResistanceUK StandardsBS476:Part 3:1958/2004The system has been tested under BS476:Part 3 - External Fire Exposure Roof test, and achieved the designation EXT.F.AA, which is the highest rating achievable.INDEPENDENT ACCREDITATIONEuropean StandardsThe products used within the Bauder LiquiTEC Roof System have been successfully tested under the three test methods prescribed under ENV 1187.n German standard - Test method 1n Nordic Standard - Test method 2n French Standard - Test method 3Rot ResistanceThe products are certified under FLL (Forschungsgesellschaft Landschaftsentwicklung Landschaftsbau) guidelines, which is the benchmark test for root resistance in Europe and has been for the last 20 years.
87 bauder.co.ukCOLD APPLIEDSYSTEMSTechnical Guide Pages 95 - 97CADSpecification SupportCAD DRAWINGSwww.bauder.co.uk/technical-centreNBS SPECIFICATIONSwww.bauder.co.uk/technical-centreTECHNICAL HELPLINET: +44 (0)1473 257671E: firstname.lastname@example.orgPROJECTS PORTFOLIOE: email@example.comW: www.bauder.co.uk/media-centreBauder LiquiTEC Roof SystemCold liquid applied, fully reinforced waterproofing system for roofs.The Bauder LiquiTEC Roof System was developed to offer the maximum versatility in roof waterproofing. The unique system properties allow Bauder LiquiTEC to be used all year round to waterproof cold, or inverted flat roof constructions, including extensive and intensive green roofs. The system is suitable for both new and refurbishment projects where its compatibility with most substrates becomes invaluable.The fast curing properties of the PMMA waterproofing resins allow exceptionally fast installation times compared with other less technically advanced cold liquid applied systems.KEY FEATURESn Totally cold appliedn Polyester reinforcedn >2 mm dry film thicknessn Exceptionally fast curingn Compatible with a wide range of substratesn Seamless - no joints or fixingsn Solvent, isocyanate and halogen freen Fire resistantn Root resistantn 20 year guaranteen Colour - RAL 7031 Blue GreyGeneral Benefitsn The system's elastomeric properties make it resistant to unforeseen cracking.n With exceptionally short rainproof times, weather windows can be maximised to ensure the highest levels of productivity.n The products are resistant to ponding water, often inevitable on flat roofs, particularly in overlay situations.n The Bauder LiquiTEC system offers high levels of resistance to acids and alkalis, unlike most types of flat roofing products.n Can withstand permanently sited loads, allowing the possibility for plant to be located on the roof.n The Bauder LiquiTEC Roof System is designed to be low maintenance, minimising service costs.n As the system is installed using a roller and brush, it can be applied to areas that are difficult or even impossible to waterproof using sheet membranes.