85 bauder.co.ukTechnical Guide Pages 95 - 97CADSpecification SupportCAD DRAWINGSwww.bauder.co.uk/technical-centreNBS SPECIFICATIONSwww.bauder.co.uk/technical-centreTECHNICAL HELPLINET: +44 (0)1473 257671E: technical@bauder.co.ukPROJECTS PORTFOLIOE: marketing@bauder.co.ukW: www.bauder.co.uk/media-centreCOLD APPLIEDSYSTEMSCold Liquid Applied SystemsBauder Cold Liquid Applied Systems are based on PMMA (Poly Methyl Methacrylate) resin technology. This technology combines ease of application, exceptionally fast cure, and durability, to provide a cold liquid applied waterproofing product second to none.BAUDER LIQUITEC ROOF SYSTEMThis polyester reinforced system is intended for both new build or refurbishment projects and can be applied to a wide variety of substrates including concrete and timber decks, as well as most existing waterproofing membranes such as asphalt, bitumen membranes, and even synthetic single ply, subject to condition and suitability. If insulation is to be incorporated, an inverted roof construction is recommended. The system comes with a 20 year guarantee as standard.BAUDER BALCONY, WALKWAY AND TERRACE SYSTEMThis system incorporates all the features and technology of the Bauder LiquiTEC Roof System with the added benefit of a heavy duty wearing course to make it suitable for use in both light and heavily trafficked areas. If an insulated system is required this will be an inverted roof construction, with a surfacing such as pavers or timber decking. The system is supported by a 10 year guarantee.Benefitsn Considerable health and safety benefits during application, as there is no requirement for hot works of any kind.n Cost savings compared to traditional systems due to a saving in labour hours through speed and simplicity of application.n Although thicker and therefore more robust and hard wearing than other cold liquid applied systems, it is much thinner than asphalt, which means threshold heights can be kept to a minimum.

bauder.ie86BAUDER LIQUITEC ROOF SYSTEMETA CERTIFICATION - CE MARKINGThe products used within the Bauder LiquiTEC Roof System are tested and certified under ETAG 005 - Liquid Applied Waterproofing Membranes issued by the European Organisation for Technical Approvals (EOTA). Products are deemed fit for their intended use if they comply with the relevant European Technical Approval. A construction product with an ETA can carry CE marking and can be placed on the market in any EU member state.Fire ResistanceUK StandardsBS476:Part 3:1958/2004The system has been tested under BS476:Part 3 - External Fire Exposure Roof test, and achieved the designation EXT.F.AA, which is the highest rating achievable.INDEPENDENT ACCREDITATIONEuropean StandardsThe products used within the Bauder LiquiTEC Roof System have been successfully tested under the three test methods prescribed under ENV 1187.n German standard - Test method 1n Nordic Standard - Test method 2n French Standard - Test method 3Rot ResistanceThe products are certified under FLL (Forschungsgesellschaft Landschaftsentwicklung Landschaftsbau) guidelines, which is the benchmark test for root resistance in Europe and has been for the last 20 years.