bauder.ie174BAUDER PEDESTAL SUPPORT SYSTEMAdjustable Pedestals for al Types of Terraces and Decking AreasThe Bauder pedestal support system is a range of lightweight, durable paving and decking support units, designed to meet the most exacting standards of both finish and level demanded by architects and clients when specifying open-jointed paving and decking finishes. The range of units, which are adjustable in height from 17 - 850mm and incorporate slope corrector heads that are variable to a maximum of 5%, are manufactured from black, UV-resistant high density polypropylene. A range of head attachments allow the gaps between pavers to vary between 2 & 10mm and there is also a joist batten holder available to secure the bearers for timber decking systems.The Bauder pedestal support units provide a lightweight and cost effective solution when seeking to minimise the height of a free-draining paving system when compared to the traditional bedded permeable paving options.Applicationsn Roofsn Terracesn Balconiesn Plaza decksn PatiosDPH Pedestals supporting large format marble slabsRestaurant terrace utilising concrete slabsAdvantagesn Eliminates algae and efflorescencen No bedding sand requiredn Quick to installn Cost-effectiven Lightweightn Reduces sound transmission n Improves heat insulationKey Featuresn A lightweight, heavy duty telescopic pedestaln Integrated slope corrector headn Suitable for a wide range of landscaping applicationsn Works with paving, decking and grillagen Allows easy access to concealed services and waterproofingn Supports loads of up to 1,000Kg - per pedestal

bauder.co.ukINTENSIVETECHNICAL GUIDE175PH5 SLOPE CORRECTORTo compensate a slope from 0 to 5% (slope from 0 to 5cm per linear metre). For good water run-off on roofs the slope should be around 2%.SLABSThe most common use for the units is to support concrete and stone paving slabs. Where the longest edge of a slab is greater the 450mm, an additional pedestal is usually required under the middle of each slab.TIMBER DECK BOARDSThe number of pedestals required is determined by the span of the joists used, and can only be calculated once the live load requirements are established. Please call us if you wish to discuss this further. GRILLAGEThe units can also be used as a support for a wide variety of structural elements such as grillage, shown above. Please call us if you wish to discuss your particular requirement further. ROOF SLOPE CONVERSION CHART5%4.5%4%3.5%3%2.5%2%1.5%1%50mm / LM45mm / LM40mm / LM35mm / LM30mm / LM25mm / LM20mm / LM15mm / LM10mm / LM2.86°2.58°2.30°2.10°1.72°1:201:221:251:291:331:401:501:671:100PERCENTAGEDEPTH OF FALLDEGREESGRADIENT1.43°1.50°0.86°0.60°PH50-5% (0 - 5cm/m)Slope Corrector Effect0 to 5%